Stop soaking water caused by water pressure
Stop flowing water through holes and cracks in concrete and masonry surfaces
Seals around pipes, conduits and ducts
Areas of application are: reservoirs, dams, tunnels cellars, underground garages, etc.
Koi / Fish Ponds and Swimming Pools Advantages
Easy to use – addition of water only or applied to surface in powder form
Sets quickly within 1-2 minutes
Expands on setting Non-Staining Durable
Frost and de-icing salt resistant
directions for use
HYDROSTOP is a very fast setting material and all preparatory work must be completed before mixing is commenced.
The surface must be firm, clean absorbent and free of dust or plaster.
Do not mix more product than can be placed with in two minutes
Wet surface to be treated before application.
Add clean water to a small amount of HYRDOSTOP and mix to the consistency of putty.
Tool material into the prepared opening and hold firmly in place until product has hardened.
Stop flowing water by forcing dry powder into cracks and hold firmly in place until product has hardened.
Repeat if Necessary
watch points
Avoid contact with skin
Avoid contact with eyes
Supplied in 1KG and 25KG buckets.